Operating table work system introduction


As the key and important medical equipment in modern medical activities, OR table installation and usage attracts much attention. And its working system has important influence on medical activities and is therefore of comparative concern.
Hydraulic system has those features of compact structure, small size, light weight, low noise, smooth control, easy installation and overall layout. Hydraulic system includes fuel tank, check valve, solenoid valve, relief valve, capsule accumulator, pressure gauge, throttle valve and cylinder. Capsule accumulator can be used as a power source for storing pressure oil and releasing energy when needed. According to the pressure gauge to achieve automatic compensation of pressure. The motors are driven independently by their respective drives. The surgical table is equipped with a hand controller for performing various motion controls.
Each electric surgery table parameter is controlled by microprocessor. The microprocessor is connected to the hydraulic and motor actuators via a control drive section. Hydraulic and motor actuators are used to complete the various movements, including forward/backward tilt, lateral tilt, height adjustment, longitudinal movement, etc. The use of microprocessor design can simplify the circuit design, greatly reduce the line failure point, and ensure the reliability of the operation table.



评论

发表评论

此博客中的热门博文

Surgical teaching system solution

图片
Why do we recommend the surgical teaching system solution? The first reason is the driving force for the development of the medical imaging system market. National policy support: The state encourages the development of digital operating rooms and has launched research on related topics. The development of medical information needs; with the advancement of medical industry information construction, the demand for video teaching, telemedicine, and information archiving has increased. Product performance improvement: The development of high-definition camera, network transmission and other technologies has accelerated the application of camera products in the medical industry. Medical accidents occur frequently and doctor-patient disputes increase. The frequent occurrence of medical malpractice prompted the hospital to archive video in order to avoid disputes. The second reason is that the surgical teaching system is the key to the advancement of the hospital. Conduct li...
阅读全文

Inspect before using the medical pendant

图片
Medical pendant is an indispensable gas supply medical equipment for modern operating room. Its main function is to supply oxygen, absorption, compression and other medical gases in the operating room. It is recognized by healthcare professionals because of its superior performance. However, we should do the inspection before using it, so that we can be prepared. Pre-inspection work of medical pendant: 1.        Check if all the parts of the PICU pendant are intact. Sometimes, when transporting or storing, due to the accumulation of products, the structure will be deformed. Be sure to check before installation, do not ignore the problem of deformation and damage, otherwise it will easily collapse or break due to improper force when used. 2.        Check that each bracket is complete and ensure that no items are missing, including instrument platform, drawers, infusion stand, sundries, etc. Although the lack of these pa...
阅读全文

What is the difference between cold light source and thermal light source?

图片
  The cold light source we often say does not actually refer to those light sources that do not generate heat during the light-emitting process, but refers to the light-emitting method that is not like the traditional light source that converts heat energy into light energy. In fact, it refers to a cold light source that uses chemical energy and electrical energy to excite the light source, and has the characteristics of variable flicker. The thermal light source we are talking about is a light source excited by thermal energy. During the light-emitting process, most of its energy needs to be converted into thermal energy, and then converted from thermal energy into light energy. Therefore, the thermal energy loss is relatively high, and the luminous efficiency is not cold light source. high. However, there are also advantages. Hot light sources can be directly connected to the circuit, and the maximum brightness can be achieved at the moment of power-on, but cold light sources can...
阅读全文